To compliment my current gearlist post, here is my current bike and bag setup for trips Oaxaca!
It hasn’t actually changed an awful lot over the years. I’ve just been settling further into the ever expanding, modular world of Tailfin. I generally try to run a mix of a few different brands but right now, my Tailfin bags are getting the most use. I just wish they had a splash of colour!
In the case of this setup and how it all works with my beautiful Jones LWB ti Spaceframe in particular, it’s been made possible by the use of two 3D printed struts that allow Tailfin’s panniers to fit seamlessly to a Jones truss fork, creating a lightweight and highly functional rack that can handle panniers from 5L to 22L per side. There’s zero rattle or movement on the ti truss fork, but you may need to tape around the pannier legs when used with the narrower diameter steel truss fork. If you’d like a STEP file with all the deets, get in touch, or you can try and download it from here.
Tailfin’s 10L panniers are a perfect size for most trips – as pictured above. When I pack my computer, I move up to the 16L panniers, or even the 22s if needed – though not for a trip that features technical singletrack, due to the extra weight and lack of ground clearance. I remain a panniers fan for most of the touring I do, and I find the Jones LWB handles especially well when it’s a little front loaded.
The Aeropack pictured below is a prototype I was given when visiting their Bristol workshop a couple of years ago – it has some cargo mesh side pockets that are super handy, great for things I like to be able to grab easily, like a washkit and my wind blocker, as well as being a good temporary home for any trash I accumulate. The main compartment is really easy to access and stores my tent, which I put away last – plus my poncho and extra food if needed. I have a couple of Tailfin arches, so I can add the ability to carry extra water or cargo too – the other arch has eyelets for cages and mounts for panniers.

Another perk for touring in Oaxaca: this whole system takes just a minute to remove, which is great for either loading the bike onto a bus, or going for a trail ride mid trip.
As you’ll likely have noticed, the Jones Spaceframe has a low standover and a sort-of carry handle. Whilst I love them both, but they do limit framebag capacity. Running the shortest of Tailfin’s Long Top Tube Bags claws some of that back, in a way that is also very easy to access on the move – I keep my sunglasses, phone, headtorch, suncream, rear blinky, and a few snacks in there.
A Revelate framebag stores tools, an inner tube, pump, plus a 2L water bladder. Despite my best attempts to overload it, the zipper refuses to break.

This is the shortest of Tailfin’s Lon Top Tube Bags, and it works great with my medium Spaceframe. It doesn’t require a strap to the headtube, either.
I have a Mountain Laurel Designs stem bag, which I find well sized for keeping a water bottle out of dust’s way. I value it’s massive, elasticated mesh pouch especially, which is great for trash and my hand sanitising gel.
If I need to carry my foam mat (good for deserty floors), it can sit above the truss forks, cinched in place with a couple of Austere straps.

Tyres wise, I like a Duro Crux 29 x 3.25in up front for comfort and grip, with a long lasting, faster rolling, less costly, and more easily available Vittorio Mezcal 29 x 2.6 at the back. I also have a set of Schwalbe Nobby Nic 29 x 2.6s which I really like too, and which also make a good combo for Oaxaca.
For navigation, I run my iPhone in a Quad Lock to access the likes of Googlemaps and Mapout, and a Hammerhead Karoo 2 for daytime navigation. For the most part the Karoo 2 has been reliable and easy to read (occasional bug glitches aside), but I wish it had a longer battery life and it could be synced offline. In this regard, perhaps the Coros Dura would be a better option. I’d also be interested in moving over to a Peak Designs Out Front magnetic phone mount, for easier on the fly video-making…

I know a lot of people run lighter, more streamlined setups than I do. But to me, mine feels like a good middle ground, one that’s easy to expand when needed, even opening itself to tours where multiple days of food are required, or pared down to the minimum too. I also love that it’s super speedy to remove everything, either for a bus ride, or just to get out on a fun trail without the weight of extra racks and hardware. And, I can also transfer it all over to my trail bike, or chop and change gear with Emma’s, to get maximum use out of it all.
This is not to say that I don’t have other racks, panniers, and bags in the US that I really like to run. But for here in Oaxaca, the Tailfin system has been great.
Other bits:
- I have a SON dynamo and Sinewave Beacon light. As this is my go-to bike, I love having a dynamo and dependable illumination in the city. It’s a big investment, especially as the Jones uses a 150TA front hub, but it’s very much worth it in my books. If I didn’t stop as much as I do for photos, the Beacon be a useful way of topping up a cache battery on a bike tour too. As it is, it’s perfect for keeping my JBL Clip 5 charged and 24hr tunes on the go!
- Gearing-wise, I run a 30T chainring and a 50T cassette. Combined with a 29 x 2.6in tyre, this gears lowest gear of around 19in, which I put to good use in Oaxaca. Bikepacking.com’s gear inch calculator is a really easy way to figure this out. Don’t be tempted to skimp on those low gears!
- My dropper post is a very affordable and relatively basic TranzX Kitsuma model, and it’s proved itself very reliable over the last few years. I love dropping my post even on dirt road descents these days, though I do have a lovely ti seat post that adds lots of compliance and comfort for more road-based tours.
- I run a basic Sunrace 11 speed cassette – it’s mostly steel and very durable – with mid-level Shimano components, like Deore and SLX. I may well give the 8 speed Microshift Advent drivetrain a go in the future. Although I’d lose a couple of teeth (it maxes out at 48T), the price is right for replacement parts like a cassette and chain.
- Brakes are Shimano hydros (Deore and XT), as pads are easy to find and all the shops here can bleed them.
- Rims are Jones’s alloy, 32H, double walled and eyeletted. They’re not the lightest rims in the world, but they’ve proved very durable. Mine drilled for Schrader tubeless valves, which I really like.
- Aside from the frame and fork, which is of course extremely fancy, everything else is pretty down to earth, functional, and easy to fix or replace in most modern bike shops here.
Son Dynamo powers all important JBL Clip 5! (plus other useful stuff like lights)
45mm rims just fit Vittorio Mezcal 2.6s. Valves are drilled for Schrader tubeless.

This is pretty much the same setup, albeit with big ol 22l panniers and a 2.6in Nobby Nic up front, instead of that monster Crux Duro. Good for dirt roads. Notsogood for trails.

Here I am compensating for an all black setup with my T shirt.

And here I am back in 2021 in the same spot! Similar idea – a Tailfin Aeropack but with Jones front bags, as the Tailfin ones weren’t out back then. I’ve since returned the Jones SWB frame to Jones HQ.

Weirdly, I’m now looking very similar to our Oaxaca sticker…
Here’a variation on packing a theme that I really like too; weight is nicely balanced across the bike with a slight emphasis up front, depending on how I pack it. The rear rack is another Tailfin experiment. This setup allows full use of the dropper, and the rack’s platform serves for additional cargo if needed, like a tent. Small, slim rear panniers are less likely to pump up against my legs when I’m pushing the bike, which I often ended up doing…
With 29 x 2.6s.

It’s nice to have full use of the dropper, too.

And with 29 x 3in and 29 x 3.25s!

And towing a Farfarer Trailer with Huesos!
That’s it for now! Any questions, fire away!













J. Meade R. Anderson
21 January 2025 at 5:05 pm
Hey, I’m very interested in the 3D printed strut for the Jones truss so any details or pictures would be great…
Cass
23 January 2025 at 5:38 pm
I’ll grab some pics. And see if I can track down the printing file, too!
Cass
29 January 2025 at 8:02 pm
Drop me a message via IG and I can send you a file.
Dangeek
31 March 2025 at 9:24 pm
Hi,
Did you get the details and file for this? I’d love it if you could share it with me.
Cass
1 April 2025 at 10:48 pm
I have no experience of 3d printing… but hopefully this STEP file has the info you need!
https://www.dropbox.com/scl/fo/tpbmg6miwgitwd68zlfj1/AHV-V_fy0MscFsT40f3Pj7s?rlkey=cv0md91q7h20speqrhfze8r6f&dl=0
Daniel Layton
2 April 2025 at 3:58 pm
Thank you very much 🙏
Daniel
27 February 2026 at 2:54 pm
Hey Cass, I just want to say thanks again for these 3d print files. I got them printed right away (in petg), back in April and have been ridding with them almost daily in the UK and Turkey.
I had the file adjusted as I’m not using Tailfin bags and I have the steel Jones fork.
I hope all is well with you.
Cass
2 March 2026 at 5:24 pm
That’s great to hear! I’d loved to see a photo of how you adapted it for non Tailfin bags!
edouard
23 January 2025 at 1:38 pm
Those panniers just look comically small to me. I guess you don’t need as much gear to tour in Mexico.
Are we going to get an update on the ebike situation now that Emma has one as well?
Cass
23 January 2025 at 5:43 pm
It depends on where we go, and how many days of food we need to carry. Our ‘small’ panniers are 10L (20L pair) when packed to the brim. Great for riding trails and the bonus is that they don’t get in the way when you’re pushing your bike… which we do a lot of!
Mostly though, I use 16L panniers, so 32L in total, which is generally plenty for our needs here, whether in the mountains or the valleys.
Planning some e-bike updates soon (-:
Jason
29 January 2025 at 8:48 pm
Very cool setup Cass. Thanks for sharing. I like the idea of different bag volumes with a standard attachment point on the bike. I have Ortlieb panniers on my commuter bike, which have been quite good, in that you can buy parts, but I do find they rattle off pavement. Do the Tailfin panniers not rattle at all, as claimed? If not, is that because it only works with their rack? I wonder if they even make Hypalon in different colours. My folding sea kayak hull is Hypalon, and it’s black too. Another thing with a low top tube is the funny angle at the stem. My Rockgeist tt-bag doesn’t sit flush with the steerer. Have a great day!
Cass
29 January 2025 at 9:49 pm
I’ve been a big fan of Ortliebs in the past and have always been impressed by their durability. However, Tailfin’s neat X Clamp system has really won be over as it’s so secure, completely rattle free within their own ecosystem, and thanks to its cam closure, weirdly satisfying to use!
The fit is also great on the ti truss fork – no rattle at all. But I’ve had to tape up the stabilising ‘feet’ a little for the narrower diameter steel truss fork. If you 3d printed your own, you can take this into account, I expect.
Tailfin’s top tube bag is pretty neat. It doesn’t require a strap to the headtube, so it doesn’t matter about the angle between the top tube and the stem. I’ll add a close up pic.
Jason
3 February 2025 at 6:47 pm
Ah ha. Good to know. I misunderstood – I thought the clamp stayed on the bike, but I see it stays with the pannier. I think you should be a JBL ambassador 🙂
Jo-Anne
3 August 2026 at 3:11 am
Hi Cass, I’m a big fan, especially love your realism and no frills approach to riding and gear! I have a LWB Ti Spaceframe and i’m pretty little (at 5’2″ and 60kg). I’m currently running 2.8″ Coronado (light casing) on Light Bicycles RM29C15 (45mm internal). I want to drop to 2.6″ because it seems impossible for find a 2.8″ tyres that are not too chunky (heavy) for my needs. I would have thought I’m now facing the hard choice to swap out rims with i30 or i35 (or second wheelset???), but looks like you’ve got 2.6 mounted on i45??? Also a bit worried that changing rims and going to say, mezcal 2.6, won’t actually save me much weight….. can you give your thoughts on how best to handle please? I use my bike for loaded and unloaded bikepacking, and am wanting to do Hunt1000 on this bike so looking to get weight/rolling resistance cost as low as possible while retaining comfort and durability.
Cass
4 August 2026 at 10:33 am
Thanks Jo-Anne!
And what a lovely bike you have (-;
I’ve run Mezcal 2.6s and heavy duty 2.5in Surly ETs on my C-Rims (49mm internal) – and Mezcals actually end up measuring about 2.8in, though you do drop a little in terms of bottom bracket height compared to a ‘true’ 2.8in tyre.
However… I now have a narrower set of rims – Light Bicycles, 40mm internal – that I built up for my SWB, and after comparing the two, I much prefer the profile of a 2.6in tyre with these narrower rims. It’s more ’rounded’ and less ‘flat’, which I find makes for lighter, more enjoyable steering. I suspect the C-rims are the stouter, stronger option for loaded touring and are certainly preferable for Dura Cruxes (a favourite tyre of mine, despite their added weight), though so far, so good with the Light Bicycle rims in terms of durability. Aside from trimming back a little rotational weight, they lend themselves to a nice tyre profile with a 2.6 and offer enough stability for my 3in WTB Rangers too. A good middle ground.
I have a little bit about my newish wheelset here:
https://stilloutriding.com/2025/10/santa-fe-s24o-a-lesson-in-layers-and-some-upgrades-to-the-swb/
40mm is as narrow as I’ve gone so far, but I suspect I’d be equally happy running a 35mm wheelset with 2.6 Mezcals, or a narrower tyre than that – like the lightweight Schwalbe 2.35in G-One Speeds, for routes that are more road-based.
Hope that helps!
EDIT! I just checked, and it seems my rims actually measure 35mm internal. I’m definitely a fan!
Chad
7 August 2026 at 8:26 pm
Thanks for all of your informative posts! I’ve read them for many years. I’ve owned and loved my Jones Plus for nearly a decade now and like the idea of adding the Tailfin packs to its steel truss. What is the composition of the bar that runs between the two 3D struts on your bike and supports the bag hooks? Is it hollow?
Cass
9 August 2026 at 5:24 pm
Thanks for your kind words!
And I’m glad to hear you’re a fellow Jones enthusiast.
In terms of materials, it’s a piece of hollow aluminium tubing. The 3D printed supports – the bits that wedge between the truss fork – aren’t ‘perfect’ in terms of their shape, but they’re good enough. Bear in mind that the diameter of the tubing on Jones’ ti forks and steel forks are different, and even the length between them too, given that the SWB and LWB have different offsets. If you’re 3D printing savvy, I bet you could make some improvements tailored to your particular fork.
This said, I’ve run these struts on all the combinations (ti/steel/LWB/SWB), and they work well for me. They include grooves for zip ties but in practise, I haven’t found I really need them, as they wedge themselves in. Just remember they’re side specific.
I hope they work out for you!
Chad
12 August 2026 at 3:17 am
Thanks for all the information, Cass! I’m lucky that my next-door neighbor, a dedicated e-bike commuter and tinkerer, owns a 3D printer and is happy to print items for his friends. I’ll run the project by him and see what modifications and possible improvements he’d recommend. By the way, I’ve long wanted to find a bag that fits in the truss fork’s center space, the area from the handlebars down to the little triangle above the tire. I made some measurements, did some internet searching, and placed my order. The bag, a Blackburn Elite Outpost Cargo Bag Rolltop, arrived today. At 6.5 liters, it fits the space perfectly when filled and has loops on the back through which one can run straps to secure around the head tube; for extra stability, I’ll also run a strap from the bag’s top clasp to the Jones bar. Here’s hoping it works well in practice and that someday it’ll be paired with the Tailfin bags hanging from aluminum tubing between 3D-printed supports.